Highlands_guy

A friend uploaded his Cachetur route and shared it with me. There were a few caches with corrected coordinates. I copied (copy to iPhone clipboard ) the coordinates from the Cachetur app into Cachly notes (I like to have a copy of my corrected coordinates there for reference). I was expecting Cachly to recognize them as coordinates so I could long press on it and set as corrected coordinates, but Cachly didn't highlight and underline. However Cachly did recognize the coordinates when I created a new waypoint and pasted the text in the text filed of the new coordinates screen. This is the format that Cachetur provides: N49º 57.238' W125º 22.801' Not sure if it's the format of the degrees symbol (shows with a line below it when I pasted them in my e-mail and in Word). Thanks Nic for all your efforts.Time for another tip.

I often receive an text from a friend asking for help on a cache. The text will say something like "Hey, any info on GCABC12?" or "I'm at GCABC12, do you have a hint" With a text I don't have the option to just highlight the GC number, I have to copy the whole text and paste into the search field of Cachly, then edit it, delete the info before/after the GC code, then search. It would be great if Cachly would parse the info I pasted into the search field without the need to do the extra steps. Thanks!

Sorry for the late reply. This one was an online cache. I can't say 100% that i didn't exit the personal notes screen before shutting down (and force close) Cachly (but I doubt I did).

I've seen this a few times. I add personal notes in Cachly, or update existing ones and they don't update on Geocaching.com. Today it was modifying some existing notes with info I gathered on a puzzle. I get home, go to Geocaching.com, and the updates are not there. I was in good cell coverage. I backed out of personal notes each time I did a change. My question is: What action triggers a change in a personal note to be sent to GC.com? Thanks.

It just happened, this time I did nothing other than load about 200 caches, move the map around a bit, zoom in and zoom out, hit the X, and the caches didn't clear from the screen. I can't see any pattern at this time.

It happened twice again today. I was thinking it was related to loading a larger number of caches, but it happened with 100-200 caches today. I might be related to opening a cache and updating corrected coordinates (or not). Here is a picture of when i tried to clear the screen (X box is gone) and an error message when I tried to add the caches on the live screen to a list (I selected the 3 dots on the top left corner). it seems the app thinks there are no caches on the screen.

I have seen it twice. I'll keep an eye on it and if it happens again I'll try to figure what lead to it.

PS: This is an iPhone 6s, 128GB model

I have noticed this at lease twice. The most recent was on 5.1.4 (2), not sure about the other time I noticed it. I downloaded about 1200-1500 caches (live screen using the reload button). I did a few things, moved the screen, opened a cache, I think I updated corrected coordinates and then I tried to clear the screen with the X button (lower right), but not all the caches cleared. The X button went away. I reloaded some more caches, the X button came back. I pressed the X button, the caches that just loaded cleared, but all the rest were still on the screen. Here are 2 pictures. One before I hit the X button, one after. Note the X button is gone, but the caches are still on the screen

No I hadn't, but just did. Yes, that's much easier than copy coordinated, create new way point, paste etc. It would be a "nice to have" to add a "Set as corrected Coordinates" option, but this is much better than the way I was doing it.

Is there a way to convert additional waypoints to corrected coordinates? Example: https://www.geocaching.com/geocache/GC85CDQ When I open the waypoints I don't see an option to save as corrected coordinates (screenshot attached). I have to copy coordinates. Paste to personal notes. Open personal notes, long press on the coords, save as corrected coords. Is there a simpler way? Thanks. PS: Thanks Nick for the Cachly trackable as part of my VIP package at GeoWoodstock last week.

Thank Nick. I tried it and it works great! Shared by airdrop, text message and e-mail. Question: When sharing a cache with corrected coordinates (and i send private data), is there any way the person receiving the GPX file into Cachly can tell it has corrected coordinates? Thanks again. (PS: I'm really looking forward to Sunday, the 24th)

We were trying to Airdrop a single cache tonight and couldn't figure out how to do it. I was on the receiving end and it seemed to come in as a text file.It was sent as a text file. This is the content of the text file: Checkout geocache "ROCK-ET - HAG XV" (GC80PC0) #geocaching #cachly http://coord.info/GC80PC0 I ended up putting it into Dropbox, opening the text file, copying the GC code and pasting it into Cachly. Is there an easier way to send a single cache? Thanks.

I just noticed an issue when logging trackable visits as part of a cache log. It looks like the date the trackable is logged is the date that I sent the cache log, not the date that I have selected as the cache log date. Example, tonight I was submitting a log of a cache I found yesterday. I started my cache log yesterday and tonight I finished writing up the log, selected a trackable and set the log type as visited and submitted the cache log. The cache log is correctly dated as yesterday, but the trackable log is set as today. Is this normal? A bug in the system? Thanks.

Thanks. I'm sure there are many other things of higher priority/use. This is a bit of an anomaly that a typical user would not run into.

I have an offline list of archived caches. I refer to it from time to time when trying to find a cache and if I remember an old one was in the same spot. I came across a situation where 2 archived caches had the same coordinates. I could only see one of them on the map. I couldn't figure out a way to see both of them. I went to list view, but only one was obvious. The 2 caches were GC7YFY6 and GC5VRY1 I finally copied all "Visible" caches to a new list, them was able to see both of them in list view. Is there another way too see both caches? Thanks

I downloaded some offline lists, but note that some logs are duplicated but without a user name. Here's what I did: I created some lists on Project-GC. I then uploaded them to a list on Geocaching.com. On Cachly I opened the on-line list I just uploaded from Project-GC, then saved to a new off-line list (full data). I then opened the offline list and refreshed the data (full data). When I open a cache from this offline list, I notice that many logs are duplicated. The duplicates typically don't have a cachers name above it, but has the same date and log text. I then do a "Pull down" refresh on that one cache from the main detail screen of the cache and the duplicate logs are all gone. I would have thought that doing a full refresh on the list would have done the same thing. Here's a picture showing the before/after look of the log files.

I have a friend that uses several text templates, but when he selects one and tries to log a cache, it doesn't use the one he selected. It uses another one he had selected previously. I tried shutting down the app and restarting, but that's all I've tried at this time. Thanks,

That looks like a very intuitive indicator. Having it on the compass screen is not a bad idea, as it's of most concern when navigating to a cache. Even if it was also in the corner of the map while navigating would be nice. An indicator is probably not needed on the map when not navigating as it would add clutter and block map detail.

Thanks Nick. I suspect this is a software issue on the phone and is more widespread than just my phone as I've experienced it on 2 phones. There may be some value in having a GPS signal health indicator in Cachly. Some apps use a satellite dish icon to show good GPS signal (with a slash through the icon when poor/no GPS).

I have an iPhone 6s and have had random problems of it not showing my correct position on a map. Sometimes it's 50-100 meters off, sometimes several Kilometers off. I downloaded a 3rd party app (GPSdiagnostics) to show me the GPS signal strength. In each case where my position was off, the GPSdiagnostics app showed the phone was not receiving GPS data and was only getting position from cellular/WiFi data.. I opened several cases with Apple. In each case, the item that resolved the issue was a full factory reset of the phone and restoring from back up (which is a pain). Apple finally replaced the phone about 3-months ago. The new phone worked well until 2-days ago. Again, it was not receiving GPS data. Another call to Apple. It was identified that i was 1 OS version behind (I was at 11.4 and 11.4.1 was out). I did the OS update and the GPS started working again. I expect it will be happen again. One thing I found with Apple support, as soon as I mention I'm using a 3rd party app for my position (like Cachly, Google maps etc.), they try to shift the blame to the 3rd party app, so I only reference the issue is happening with the native Apple "Maps" app. What I was looking for was some Apple native app or test that would show me the GPS signal level that the phone is receiving that I could use when talking to Apple about this issue. Does anyone know of any Apple app or test to show the GPS signal strength on an iPhone 6s? FYI: Here's what the GPSdiagnostics app shows me when the GPS is working: Thanks

My suggestion is to change the "Filter" Icon to be a sold red color when the filter is active instead of the solid white. Keep it as a white outline when not active. I think this would give a better contrast and more likely to be noticed. Thanks for a great product!

Thanks. That was probably it. I was near the Canada US boarder and my phone was seeing the US cell system. I have roaming turned off, so not to get any data charges. I'll try again with airplane mode on. Thanks again.

I did a search, but didn't find an answer on this. I was out of cell coverage on the weekend and tried to do a coordinate projection on Cachly but it came back with an error that indicated I had to have internet connection. This was also the case when I tried to enter coordinates for the second stage of a multi-cache. Is there a way to do projections or add coordinates when outside of cell coverage? Thanks.

Only if it is a selectable feature to give the user the option to switch all corrected cords back to original or leave all caches with corrected cords at the corrected location. If it's not selectabe, I prefer it the way it is now. No change.